Specialty Surface Cellware and Inserts
Altenloh Brinck & Co US INC. DBA: SABEU 6 well insert 3.0 um PET PK48 (cellQART)
These cellQART Cell Culture Inserts come with PET membranes in clear optics in 6-Well format. The Inserts are tissue culture treated, sterile and are compatible with most standard Cell Culture Plates. They are ideal for in-situ phase contrast microscopy.
Sterlitech Corporation cellQART 24-Well Cell Culture Insert PET, 0.4um, Translucent, 48/pk
cellQART 24-Well Cell Culture Insert PET, 0.4um, Translucent, 48/pk
STEMCELL Technologies Organoid Embedding Sheet (6-Pack), Size: 6 Units
The Organoid Embedding Sheet is designed to facilitate embedding 3-dimensional (3D) aggregates (e.g. embryoid bodies, spheroids, or organoids) into a matrix. The wells on the sheet are designed to fit aggregates up to 5 mm in diameter. The sheet may be grasped at the top, along the label, for easy handling. The Organoid Embedding Sheet can also be a substitute for Parafilm and used to mix small volumes in various protocols. Each sheet contains 18 wells, and the sheet is compatible with STEMCELL media products such as STEMdiff™ Cerebral Organoid Kit (Catalog #08570).
ADW DIABETES ULTICARE U-100 PET SYRINGES 29
The UltiCare Pet Syringes U100 are made specifically for veterinary use. This pack of 100 29-gauge pet insulin syringes is designed for use with U-100. These easy-to-use Ulticare pet insulin needles are intended for single-use to ensure sterility. The clear markings make it easier to administer the correct dosage for dogs and cats.Features of Ulticare 09230 Vet U100 Pet Syringes:29G, 3/10 cc, 1/2" (12.7mm) needlesLatex-freeFor use with U-100 onlyEach box contains 100 UltiCare pet insulin syringes.
Ibidi USA Culture-Insert 2 Well 24, #1.5 polymer coverslip
Complete solution for wound healing experiments, requiring only a few steps from sample preparation to image analysis.Reproducible experiments owing to: a defined 500 µm cell free gap, no leakage during cultivation, and no material being left behind after the insert’s removal. For screening applications. High parallelization. Based on µ-Plate 24 Well Black ID 14 mm – i.e., suitable for fluorescence and high resolution microscopy.
Ibidi USA Culture-Insert 2 Well in µ-Dish 35mm, Low, ibiTreat - Tissue Culture Treated Polymer Coverslip
The ibidi Culture-Insert family is developed for wound healing, co-cultivation, and migration assays of adherent cells. The Culture-Insert 2 Well consists of two wells, separated by a 500 µm wall. A proprietary biocompatible adhesive is applied to the underside of the Culture-Insert which allows it to adhere to any flat, clean, and dry surface. A cell suspension can be placed in the wells allowing the adherent cells to grow in the designated areas only. After cell cultivation, the Culture-Insert can be removed by using sterile tweezers. The removal creates a clean, cell-free, and well-defined 500 µm gap. Live-cell imaging can be used to analyze the gap closure. The Culture-Insert 2 Well comes ready-to-use in our µ-Dish 35 mm, Low, ibiTreat dishes. sterile, 30 pcs./box.
Ibidi USA micro-Insert 4 Well for Self-Insertion, 25 Culture-Inserts in 10 cm Transport Dish
The micro–Insert 4 Well is a biocompatible, silicone insert ideal for long term microscopy and stem cell cultivation. The micro–Insert has a special sticky bottom that prevents leaking on clean, flat, and dry surfaces, such as microscopy slides and dishes. Adherent or non–adherent cells placed into the small wells sink to the bottom and can be analyzed microscopically. The wells provide rectangular digital format (4:3) for covering the entire area by CCD cameras on microscopes. Tapered walls provide excellent optical access to cells located near the edges of the well. After cell attachment, the micro-Insert can be removed by using sterile tweezers without leaving a residue. 25 micro-Insert 4 Well in 10 cm transport dish, sterile, 25 inserts/box
Ibidi USA µ-Slide VI 0.4, ibiTreat - Tissue Culture Treated Coated Polymer Coverslip
The ibidi product family is comprised of a variety of µ-Slides and µ-Dishes, which have all been designed for high-end microscopic analysis of fixed or living cells. The high optical quality of the polymer material is similar to that of glass. This allows the researcher to perform a wide variety of fluorescence experiments with uncompromised resolution and choice of wavelength. The convenient six channel format of the µ-Slide VI 0.4 is ideal for static cell cultivation and the application of standard immunofluorescence protocols, like treatment, staining, and microscopy of living or fixed cells. Alternatively, the µ-Slide VI 0.4 can be connected to a pump and enables you to observe cells under flow conditions. 6 x 400 µm high channels, #1.5 polymer coverslip, tissue culture treated, sterilized, 15 pcs./box
Ibidi USA Culture-Insert 2 Well in µ-Dish 35mm, High, ibiTreat - Tissue Culture Treated Polymer Coverslip
The ibidi Culture-Insert family is developed for wound healing, co-cultivation, and migration assays of adherent cells. The Culture-Insert 2 Well consists of two wells, separated by a 500 µm wall. A proprietary biocompatible adhesive is applied to the underside of the Culture-Insert which allows it to adhere to any flat, clean, and dry surface. A cell suspension can be placed in the wells allowing the adherent cells to grow in the designated areas only. After cell cultivation, the Culture-Insert can be removed by using sterile tweezers. The removal creates a clean, cell-free, and well-defined 500 µm gap. Live-cell imaging can be used to analyze the gap closure. The Culture-Insert 2 Well comes ready-to-use in our µ-Dish 35 mm, High, ibiTreat dishes. sterile, 30 pcs./box.
Grainger Turning Insert Trigon WNMG 431WF PV710
The Grainger 185GN8 is a 1/4 HP, 115V, 60Hz, 1725 RPM, single phase, open drip proof fan motor with a 48 frame size. It has a sleeve bearing and is thermally protected. The motor is totally enclosed and fan cooled (TEFC) with a cast iron body. It has a 1/2" diameter shaft and measures approximately 5-3/4" long by 5-1/4" wide by 6-1/2" high. The operating amps are 3.6 at full load. This electric motor is designed for continuous duty applications.
Alkali Scientific ASI™ Hanging Cell Culture Inserts with TC Treated Plates, Polyethylene Terephthalate (PET), 12 Inserts / 24well Plate, PS, PET membrance, Translucent, 6.50mmØ, 8.00μm pore, 0.20-0.35mL, 0.33cm², Sterile to SAL 10-6,12/plate/48/case
ASI™ Hanging Cell Culture Inserts ▪ Distance from membrane to the bottom of the well: 6well Insert 1.2 mm,12well Insert 1.2 mm, 24well Insert 1.3 mm▪ Nominal membrane thickness: 10 ~ 23 μm▪ Frame material: Polystyrene (PS)▪ Packed in cell culture-treated cell culture plates ▪ Also known as Transwell permeable support inserts▪ Non – pyrogenic▪ Non – cytotoxic▪ DNase / RNase – free▪ Human DNA – free